HP Color LaserJet CM1312nfi Multifunction Printer Driver Download

Posted on

HP Color LaserJet CM1312nfi Multifunction Printer is one of the printers from HP. This can be a great partner for working with documents since this printer can handle good jobs in printing. This is an all-in-one printer. It means that this is a multifunction printer that can provide you with many functions for working with documents. In this case, if you will need the driver to installed in the PC, you will not get access for using this device. In this case, you can easily get the driver from Software printer. This can be the best link to get the suitable driver for this HP Color LaserJet CM1312nfi Multifunction Printer.

The link can provide you with many kinds of printer driver. You can get the best driver based on the specification of the printer. The link can provide you with complete compatibility and you will not find difficulties. The driver is compatible with some operating system. The driver of  HP Color LaserJet CM1312nfi Multifunction Printer from this link compatibility for Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, and even the link can be compatible for Windows XP. The driver can also work for Mac OS X version 10.6.8.

You can easily download the driver from the link. You can use the Driver Navigation to download automatically to your PC. However, sometimes things cannot run well and it cannot work automatically.

HP Color LaserJet CM1312nfi Multifunction Printer

HP Color LaserJet CM1312nfi Multifunction Printer Driver Download for Windows

HP Color LaserJet CM1312 MFP Series Full Solution

Description:
This full software solution provides print, fax and scan functionality. This software solution is specific to Microsoft Windows 7 and Windows 8 only.

This is not a software upgrade for versions of the software for Microsoft Windows XP or Vista. This software solution download is specific to Microsoft Windows 7 and Windows 8 only.

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Fix and enhancements:

  • Original Software/Drivers

Installation instructions:

Download Info: This section will assist you in the download of the software to your computer and start the install process. Below are easy-to-follow instructions for downloading and installing the printing and scanning software.

Approximately 500 MB of free hard disk space is required to use this download.

  1. Close any screen savers, virus protection programs, or other software programs running on your computer.
  2. Click on the software package (CM1312series-win7-full-solution) Download Now and a File Extracting box will appear.
  3. After the file extraction is complete- The software installer will automatically run.
  4. Follow the onscreen prompts for Setting up the device and installing software.

NOTE: this software installer has 2 steps. This installer automatically installs basic driver functions for print, scan and fax. This is all the software needed for basic functionality. After the initial software install is complete- an on screen prompt will be displayed to install more software if needed.

System requirements:

Approximately 500 MB of free hard disk space is require to use this download.

Minimum Installation Requirements:

  • A Pentium II (233 MHz) processor or greater
  • 128 MB of RAM
  • 200 MB of available hard disk space
  • SVGA 800×66 16-bit color display Typical Installation Requirements:
  • A Pentium II (233 MHz) processor or greater
  • 256 MB of RAM
  • 800 MB of available hard disk space
  • SVGA 800×600 16-bit color display

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (32-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (32-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (32-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (32-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2012

Detail Driver:
Type: DriverVersion:5.1
Operating systems: Windows 10 (64-bit)
Release date: Oct 7, 2014
Filename: CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe
Download Size (308.8 MB)

HP Universal Print Driver for Windows PCL6 (64-bit)

Description:
This is the most current PCL6 driver of the HP Universal Print Driver (UPD) for Windows 64 bit systems.

Fix and enhancements:

  • For detailed information on Enhancements/Features/Fixes and Fixes History please use the following link to refer to the Release Notes: HP Universal Print Driver

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Installation instructions:

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2012 R2
  • Microsoft Windows Server 2016
  • Microsoft Windows Server 2019

Detail Driver:
Type: Driver-Universal Print Driver
Version: 6.8.0.24296
Operating systems: Windows 10 (64-bit)
Release date: Jun 21, 2019
Filename: upd-pcl6-x64-6.8.0.24296.exe
Download Size (19.2 MB)

HP Universal Print Driver for Windows PostScript (64-bit)

Description:
This is the most current PostScript® emulation driver of the HP Universal Print Driver (UPD) for Windows 64 bit systems; Level 2 and 3 emulation.

Fix and enhancements:

  • For detailed information on Enhancements/Features/Fixes and Fixes History please use the following link to refer to the Release Notes: HP Universal Print Driver

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Installation instructions:

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2012 R2
  • Microsoft Windows Server 2016
  • Microsoft Windows Server 2019

Detail Driver:
Type: Driver-Universal Print Driver
Version: 6.8.0.24296
Operating systems: Windows 10 (64-bit)
Release date: Jun 21, 2019
Filename: upd-ps-x64-6.8.0.24296.exe
Download Size (20.3 MB)

HP Color LaserJet Firmware Update Utility

Description:

Fix and enhancements:
HP Color LaserJet CM1312 Multifunction Printer Series Firmware Enhancements and Fix List

This firmware update includes the following enhancements and fixes:

  • HP Color LaserJet CM1312 Multifunction Printer Series Firmware Enhancements and Fix List
  • This firmware update includes the following enhancements and fixes:
    -Fixed an issue where the printer would not print via a network connection if the printer had been idle for an -extended period of time, a cold restart would restore printing.
    -Fixed an issue that could cause a blurry mono print job if the job is sent immediately following a color print job.
    -The Power Save Time menu item has been restored to the menu system.

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Installation instructions:

Instructions for HP LaserJet CM1312 MFP Flash Firmware Update using Microsoft Windows:

  • IMPORTANT – Before the process starts: Turn the printer off and then back on to clear main printer memory. Disconnect the fax line prior to updating the FW to ensure an incoming Fax does not interfere with the FW update process. Make sure the firmware being updated is for the correct LaserJet product. For example, if you are updating the LaserJet CM1312 MFP Series the firmware file should be for the respective model numbered device.
  • The Firmware Update Utility can use either a Network or USB connection to the printer.
  • The HP LaserJet CM1312 MFP Series print driver software must be installed prior to using this utility.
  • The HP CM1312 MFP Series printer must be on and in a READY state as shown by the LCD display on the control panel and remain powered on during the entire firmware update process.
  • Depending on the processor speed of your PC, the firmware update process may complete on the printer before the update status progress bar in the flash firmware update utility on the PC screen completes. This is normal.
  • Once the update process has started, do not use your PC for any other activity until the process is complete.
  • Inform others connected to the product, both network and USB, to refrain from using the printer during the update period.
  • Do not power cycle the product or the PC until the firmware update process is complete.

Process:

  1. Download the flash firmware update file from HP.com to the PC desktop.
  2. Turn the printer off and then back on to clear main printer memory.
  3. Double click the program file on your desktop. An HP firmware update window will open.
  4. Select the appropriate MFP in the dialog window. If you assigned a different name to the HP MFP, choose the name that represents the correct printer.
  5. Click on “Send Firmware” when ready to proceed.
  6. The progress bar will begin to move to the right indicating information being transferred.
  7. DO NOT power cycle the product or the PC during this process or the product may become unstable and or unusable without further attention from HP. The flash firmware update can take up to 5 minutes to complete. Please be patient.
  8. During the product flash firmware update, the display on the product control panel will display “Erasing → Programming → Complete → Hewlett-Packard → Ready → Initializing → Ready”. Once the download is finished the printer will be in the Ready state.
  9. At the conclusion of the firmware update, the dialog window will show a smiley face 😊. Click on exit.
  10. The flash firmware update process is complete.
  11. If it is desired to verify the update, use the control panel Reports menu under Setup to print a Configuration Report. The configuration report will show the current firmware revision in the Product information block, Firmware Datecode: 20120104.

System requirements:

  • HP Color LaserJet CM1312 MFP Series driver must be installed.
  • Must be able to print to the HP Color LaserJet CM1312 MFP.

NOTE: The Color LaserJet CM1312 series printers share firmware code, so the enhancements/fixes are similar for both products. There are, however, separate upgrade utilities for the CM1312nfi and the CM1312. Be sure you have the correct document for the product being updated or an error may be displayed.

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (32-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 2000
  • Microsoft Windows 7 (32-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (32-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (32-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2003
  • Microsoft Windows Server 2003 64-Bit Edition
  • Microsoft Windows Server 2008 W32
  • Microsoft Windows Server 2008 x64
  • Microsoft Windows Vista (32-bit)
  • Microsoft Windows Vista (64-bit)
  • Microsoft Windows XP (32-bit)
  • Microsoft Windows XP x64

Detail Firmware:
Type: Firmware
Version: 20140625
Operating systems: Windows 10 (64-bit)
Release date: Aug 11, 2014
Filename: CM1310_MFP_Series_FW_Update-20140625.exe
Download Size (4.3 MB)

HP Printer Administrator Resource Kit

Description:
The HP Printer Administrator Resource Kit (PARK) is a collection of tools, scripts and documentation to help print administrators install, deploy, configure and manage the HP Universal Print Driver. The PARK contains both supported and unsupported software tools, scripts and documentation. Supported tools include:

  • HP Driver Configuration Utility
  • HP Driver Deployment Utility
  • HP Managed Printing Administrator
  • HP UPD Active Directory Administrative template
  • AutoUpgradeUPD
  • PRNCon

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (32-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (32-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (32-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (32-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2008 W32
  • Microsoft Windows Server 2008 x64
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2016

Detail Software:
Type: Software-Universal Print Driver
Version: 1.8.7
Operating systems: Windows 10 (64-bit)
Release date: Jun 21, 2019
Filename: PARK-v1.8.7.zip
Download Size (18.6 MB)

HP Color LaserJet CM1312nfi Multifunction Printer Driver Download for Mac OS

HP CM1312 Full Feature Software and Drivers

Description:
This download includes the HP print driver, HP Printer Utility and HP Scan software

Fix and enhancements:

  • Updated Software/Drivers for Mac OS X 10.7

Installation instructions:

  1. Click the Download button
  2. The software will automatically begin to download to your computer.
  3. With the Safari browser, downloaded files will be saved automatically in the “Download” folder by default. You can check download progress by viewing the download progress icon in the top right corner of the Safari browser window.
  4. Double click the HP file you just downloaded to launch the HP Installer for your product.
  5. Follow any on-screen instructions.

System requirements:

  • OS X v10.7

Operating Systems:

  • Mac OS X 10.7

Detail Driver and Software:
Type: Driver-Product Installation Software
Version: 1.5.0
Operating systems: Mac OS X 10.7
Release date: Dec 14, 2011
Filename: HP-Color-LaserJet-CM1312-MFP-series_v1.5.0.dmg
Download Size (9.7 MB)

How to Install HP Color LaserJet CM1312nfi Multifunction Printer Driver Download

  1. Click the Download button below
  2. Wait until the software will automatically download to your PC
  3. If you use Safari browser, the downloaded software will be automatically saved in the ‘Downloads’ folder. Check the download
  4. progression in the top corner of the Safari browser window
  5. Launch the HP installer by double clicking the downloaded file
  6. Now, you just follow any instruction on the screen.