HP Color LaserJet 4650 Printer Driver Download

Posted on

HP Color LaserJet 4650 Printer is one of the printers from HP. This can be a great partner for working with documents since this printer can handle good jobs in printing. This is an all-in-one printer. It means that this is a multifunction printer that can provide you with many functions for working with documents. In this case, if you will need the driver to installed in the PC, you will not get access for using this device. In this case, you can easily get the driver from otnix.com. This can be the best link to get the suitable driver for this HP Color LaserJet 4650 Printer.

The link can provide you with many kinds of printer driver. You can get the best driver based on the specification of the printer. The link can provide you with complete compatibility and you will not find difficulties. The driver is compatible with some operating system. The driver of  HP Color LaserJet 4650 Printer from this link compatibility for Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, and even the link can be compatible for Windows XP. The driver can also work for Mac OS X version 10.6.8.

You can easily download the driver from the link. You can use the Driver Navigation to download automatically to your PC. However, sometimes things cannot run well and it cannot work automatically.

HP Color LaserJet 4650 Printer

HP Color LaserJet 4650 Printer Driver Download for Windows

HP Universal Print Driver for Windows PCL6 (64-bit)

Description:
This is the most current PCL6 driver of the HP Universal Print Driver (UPD) for Windows 64 bit systems.

Fix and enhancements:

  • For detailed information on Enhancements/Features/Fixes and Fixes History please use the following link to refer to the Release Notes: HP Universal Print Driver

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Installation instructions:

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2012 R2
  • Microsoft Windows Server 2016
  • Microsoft Windows Server 2019

Detail Driver:
Type: Driver-Universal Print Driver
Version: 6.8.0.24296
Operating systems: Windows 10 (64-bit)
Release date: Jun 21, 2019
Filename: upd-pcl6-x64-6.8.0.24296.exe
Download Size (19.2 MB)

HP Universal Print Driver for Windows PostScript (64-bit)

Description:
This is the most current PostScript® emulation driver of the HP Universal Print Driver (UPD) for Windows 64 bit systems; Level 2 and 3 emulation.

Fix and enhancements:

  • For detailed information on Enhancements/Features/Fixes and Fixes History please use the following link to refer to the Release Notes: HP Universal Print Driver

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Installation instructions:

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2012 R2
  • Microsoft Windows Server 2016
  • Microsoft Windows Server 2019

Detail Driver:
Type: Driver-Universal Print Driver
Version: 6.8.0.24296
Operating systems: Windows 10 (64-bit)
Release date: Jun 21, 2019
Filename: upd-ps-x64-6.8.0.24296.exe
Download Size (20.3 MB)

HP LaserJet USB (DOT4) communication driver for Windows 8 and Higher (64-bit)

Description:
This driver only solution provides DOT4 USB bi-directional communication functionality on Windows 8 and higher operating systems.

Fix and enhancements:

  • Added support for HP LaserJet P3010 Printer.

Installation instructions:

This section will help you in the download of the software to your computer and start you on the install process. Below are easy-to-follow instructions for downloading and installing printer drivers.

Approximately 20 MB of free hard disk space is required to use this download.

  1. Click on the ‘Download’ button on this page.
  2. Click ‘Run’. The file will be downloaded to a temporary folder on your hard disk.
  3. Click ‘Run’ again. This will install the Dot4 driver for Windows8.

To install at a later date, select ‘Save’ on step 2 and select a location on your hard disk. When ready to install, locate and double-click the Dot4 MSI file. This will install the Dot4 driver for Windows8.

System requirements:

  • Windows 8, Windows 8.1, or Windows Server 2012
  • 64 bit processor
  • 2 GB RAM (64-bit)
  • 20 MB of free hard disk space

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2012

Detail Driver:
Type: Driver-USB
Version: 7.0.0.29
Operating systems: Windows 10 (64-bit)
Release date: Apr 21, 2015
Filename: Dot4x64.msi
Download Size (1.5 MB)

HP Color LaserJet 4650 Printer Firmware for Single/Multiple – Unix Operating System – (Must read README.TXT before installing)

Description:
The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.

The Readme file document provides specific update, installation and troubleshooting information. For additional information on the device features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer or at hp.com.

WHAT IS INCLUDED IN A REMOTE FIRMWARE UPDATE (RFU)?

The HP LaserJet Printer Remote Firmware Update file available from the HP web site contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.

WHO NEEDS THIS FIRMWARE?

Similar to Hewlett Packard providing improved software for your HP LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. These updates are available on the HP support web site.

DETERMINING THE CURRENT VERSION LEVEL OF YOUR FIRMWARE

To determine the current level of firmware installed on the device:

  1. Go to the printer’s control panel.
  2. Press the green checkmark button.
  3. Use the arrow keys and select the “INFORMATION” selection on the control panel.
  4. Use the arrow keys and select the “PRINT CONFIGURATION” selection.
  5. Press the green checkmark button to print the Configuration Page.On the printed CONFIGURATION page look in the section marked “Device Information” for the firmware date code. The firmware date code will look something like this:

20040322 07.000.0

Fix and enhancements:

ENHANCEMENTS
—————————-
The following new functionality or features are provided by this firmware release (07.006.0).

  • Added the ability to disable NFS (network file system) using PML.
  • Changed the Private Print (store until printed) feature to allow a print job to be stored with or without a PIN.

The following new functionality or features are provided by previous firmware revisions and are also included in the current firmware revision:

  • Disabled an unused network port (8900)
  • Added the ability for the Hard Disk Drive to spin down during a PowerSave
  • Included the capability of suppressing the “## Pages Remaining” message from the control panel

FIXES
—————-
The following fixes or improvements are provided by this firmware release (07.006.0).

  • Fixed a unique condition that would cause a “RESEND FIRMWARE UPDATE” message to appear and could not be cleared.
  • Corrected the Job Storage feature that adds ‘+1’ to the end of a duplicate print job being stored on the hard disk.
  • Fixed some general Postscript emulation print issues that would cause 49.xxxx errors.
  • Fixed several unique conditions which would cause 49.xxxx errors.

The following fixes were provided by previous firmware revisions and are also included in the current firmware revision:

  • Corrected several conditions that would cause 49.4C02 errors:
  • A special case where the use of an ICC profile could cause the error.
  • Printing from Mac OS 10.4.x with a file name that contains more than 50 characters.
  • A situation where PDF files might cause a process call issue in the firmware
  • The EIO page now prints when a 3rd Party Configuration Page is registered with the firmware.
  • Fixed an imaging issue that would occur when printing on custom media and then on a standard media size.
  • Fixed a situation that would cause random data corruption on an installed hard disk drive accessory.
  • Corrected the behavior when 2 JetDirect cards are installed any supplies messages that were suppressed/disabled were re-enabled.
  • Fixed a situation where certain PCL files including the “set margin command” would not print properly.
  • Repaired memory leaks that would happen during PowerSave mode
  • Fixed the condition where PML would not return the correct JobName consistently.
  • When printing PDF’s using direct PDF Printing duplexed files with an odd number of pages now print as expected.
  • Repaired a printing error that occurred when duplexing a print job with duplicate PCL duplex commands.
  • Corrected the Configuration Page printing behavior when the control panel language is set the Czech.
  • Improved performance when an IO Filter was installed
  • Fixed a situation where an image in a PDF might print in inverse colors.

Installation instructions:

NOTE: Please be aware that an update in some circumstance may require approximately ten minutes to complete.

UPGRADING FIRMWARE TO A SINGLE DEVICE

You can send an .RFU update to a device at any time; the device will wait for all I/O channels to become idle before cycling power.

Please print a configuration page prior to performing any firmware update. To print the configuration page:

  • Go to the printer’s control panel.
  • Press the green checkmark button.
  • Use the arrow keys and select the “INFORMATION” selection on the control panel.
  • Use the arrow keys and select the “PRINT CONFIGURATION” selection.
  • Press the green checkmark button to print the Configuration Page.

On the printed CONFIGURATION page look in the section marked “Device Information” for the firmware date code. The firmware date code will look something like this: 20040322 07.000.0

NOTE: If the firmware update involves a change in the format of NVRAM, the NVRAM settings will be lost and must be set again by the customer.

System requirements:

  • The RFU upgrade requires either a network, USB or parallel connection

Operating Systems:

  • Windows 10 (64-bit)
  • OS Independent
  • UNIX

Detail Firmware:
Type: Firmware
Version: 07.006.0
Operating systems: Windows 10 (64-bit)
Release date: Jun 12, 2007
Filename: clj4650fw_unix_07_006_0.tar
Download Size (13.6 MB)

HP Printer Administrator Resource Kit

Description:
The HP Printer Administrator Resource Kit (PARK) is a collection of tools, scripts and documentation to help print administrators install, deploy, configure and manage the HP Universal Print Driver. The PARK contains both supported and unsupported software tools, scripts and documentation. Supported tools include:

  • HP Driver Configuration Utility
  • HP Driver Deployment Utility
  • HP Managed Printing Administrator
  • HP UPD Active Directory Administrative template
  • AutoUpgradeUPD
  • PRNCon

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Operating Systems:

  • Windows 10 (64-bit)
  • Microsoft Windows 10 (32-bit)
  • Microsoft Windows 10 (64-bit)
  • Microsoft Windows 7 (32-bit)
  • Microsoft Windows 7 (64-bit)
  • Microsoft Windows 8 (32-bit)
  • Microsoft Windows 8 (64-bit)
  • Microsoft Windows 8.1 (32-bit)
  • Microsoft Windows 8.1 (64-bit)
  • Microsoft Windows Server 2008 R2
  • Microsoft Windows Server 2008 W32
  • Microsoft Windows Server 2008 x64
  • Microsoft Windows Server 2012
  • Microsoft Windows Server 2016

Detail Software:
Type: Software-Universal Print Driver
Version: 1.8.7
Operating systems: Windows 10 (64-bit)
Release date: Jun 21, 2019
Filename: PARK-v1.8.7.zip
Download Size (18.6 MB)

HP Color LaserJet 4650 Printer Driver Download for Mac OS

HP Color LaserJet 4650 Printer Firmware for Single/Multiple – Unix Operating System – (Must read README.TXT before installing)

Description:
The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.

The Readme file document provides specific update, installation and troubleshooting information. For additional information on the device features, refer to the online user guide found on the Windows Printing System Installer CD-ROM that came with your printer or at hp.com.

WHAT IS INCLUDED IN A REMOTE FIRMWARE UPDATE (RFU)?

The HP LaserJet Printer Remote Firmware Update file available from the HP web site contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.

WHO NEEDS THIS FIRMWARE?

Similar to Hewlett Packard providing improved software for your HP LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. These updates are available on the HP support web site.

DETERMINING THE CURRENT VERSION LEVEL OF YOUR FIRMWARE

To determine the current level of firmware installed on the device:

  • Go to the printer’s control panel.
  • Press the green checkmark button.
  • Use the arrow keys and select the “INFORMATION” selection on the control panel.
  • Use the arrow keys and select the “PRINT CONFIGURATION” selection.
  • Press the green checkmark button to print the Configuration Page.

On the printed CONFIGURATION page look in the section marked “Device Information” for the firmware date code. The firmware date code will look something like this: 20040322 07.000.0

Associated files:
These associated files go with the above software. They will not need to be installed, and will require downloading each file needed.
Please note: The installable software is listed up above, and must be downloaded separately.

Fix and enhancements:

ENHANCEMENTS
—————————-
The following new functionality or features are provided by this firmware release (07.006.0).

  • Added the ability to disable NFS (network file system) using PML.
  • Changed the Private Print (store until printed) feature to allow a print job to be stored with or without a PIN.

The following new functionality or features are provided by previous firmware revisions and are also included in the current firmware revision:

  • Disabled an unused network port (8900)
  • Added the ability for the Hard Disk Drive to spin down during a PowerSave
  • Included the capability of suppressing the “## Pages Remaining” message from the control panel

FIXES
—————-
The following fixes or improvements are provided by this firmware release (07.006.0).

  • Fixed a unique condition that would cause a “RESEND FIRMWARE UPDATE” message to appear and could not be cleared.
  • Corrected the Job Storage feature that adds ‘+1’ to the end of a duplicate print job being stored on the hard disk.
  • Fixed some general Postscript emulation print issues that would cause 49.xxxx errors.
  • Fixed several unique conditions which would cause 49.xxxx errors.

The following fixes were provided by previous firmware revisions and are also included in the current firmware revision:

  • Corrected several conditions that would cause 49.4C02 errors:
  • A special case where the use of an ICC profile could cause the error.
  • Printing from Mac OS 10.4.x with a file name that contains more than 50 characters.
  • A situation where PDF files might cause a process call issue in the firmware
  • The EIO page now prints when a 3rd Party Configuration Page is registered with the firmware.
  • Fixed an imaging issue that would occur when printing on custom media and then on a standard media size.
  • Fixed a situation that would cause random data corruption on an installed hard disk drive accessory.
  • Corrected the behavior when 2 JetDirect cards are installed any supplies messages that were suppressed/disabled were re-enabled.
  • Fixed a situation where certain PCL files including the “set margin command” would not print properly.
  • Repaired memory leaks that would happen during PowerSave mode
  • Fixed the condition where PML would not return the correct JobName consistently.
  • When printing PDF’s using direct PDF Printing duplexed files with an odd number of pages now print as expected.
  • Repaired a printing error that occurred when duplexing a print job with duplicate PCL duplex commands.
  • Corrected the Configuration Page printing behavior when the control panel language is set the Czech.
  • Improved performance when an IO Filter was installed
  • Fixed a situation where an image in a PDF might print in inverse colors.

Installation instructions:

NOTE: Please be aware that an update in some circumstance may require approximately ten minutes to complete.

UPGRADING FIRMWARE TO A SINGLE DEVICE

You can send an .RFU update to a device at any time; the device will wait for all I/O channels to become idle before cycling power.

Please print a configuration page prior to performing any firmware update. To print the configuration page:

  1. Go to the printer’s control panel.
  2. Press the green checkmark button.
  3. Use the arrow keys and select the “INFORMATION” selection on the control panel.
  4. Use the arrow keys and select the “PRINT CONFIGURATION” selection.
  5. Press the green checkmark button to print the Configuration Page.

On the printed CONFIGURATION page look in the section marked “Device Information” for the firmware date code. The firmware date code will look something like this: 20040322 07.000.0

NOTE: If the firmware update involves a change in the format of NVRAM, the NVRAM settings will be lost and must be set again by the customer.

How to Install HP Color LaserJet 4650 Printer Driver Download

  1. Click the Download button below
  2. Wait until the software will automatically download to your PC
  3. If you use Safari browser, the downloaded software will be automatically saved in the ‘Downloads’ folder. Check the download
  4. progression in the top corner of the Safari browser window
  5. Launch the HP installer by double clicking the downloaded file
  6. Now, you just follow any instruction on the screen.